KMC products are now Niagara Ready! With the Niagara tool jar, you can program any of the KMC BACnet devices in your Niagara environment from your JACE or WorkBench.
The Best of Both Worlds
Unitary controllers (e.g., RTU, HP, AHU, FCU and VAV) come fully programmed from the factory AND can be completely reprogrammed with the Niagara KMC tool set.
With the KMC Flex-Stat series of intelligent temperature/humidity/motion-sensing, wall-mounted, thermostat/controllers benefit from a single out of the box application specific, communicating DDC thermostat that covers FCU, RTU, HP and AHU applications AND have the ability to change the programming of the device to suit your application needs.
The Flex-Stat simplifies networked zone control for common HVAC equipment (e.g., packaged rooftop units, air handlers, fan coil units, and heat pumps), which can be controlled via the on-board library of programs built into the Flex-Stat. The library enables rapid configuration of a wide range of HVAC control applications via the Flex-Stat’s easy-to-use display and buttons. AND, the standard library can be customized (using the new Niagara tool jar, BAC-stage or Total Control) to meet the unique site needs and application specific requirements of a particular project.
Your complex control specifications. Solved.Are you a Niagara System Integrator? Do you install your own IP LAN networks for your projects?
This new industrial network router from Contemporary Controls is just what you need!
 |
| EIPR data sheet |
EIPR is a DIN rail mounted high ambient industrial Ethernet router that is easy to setup and use. It even includes a 4 port Ethernet switch. It offers an array of features that matter to a DDC integrator such as: high ambient ratings, DIN mountable, UPS connectable, and most importantly, network savvy, ready to handle all your port forwarding needs for today’s multi IP connected system architectures.
The EIPR-E has sophisticated port forwarding capabilities and a secure firewall protection for your IP networking needs.
The EIPR links two Internet Protocol (IPv4) networks together — passing appropriate traffic while blocking all other traffic. One of the networks is designated the local-area-network (LAN) and the other the wide-area-network (WAN). Because of the built-in stateful firewall, communication initiated on the LAN-side passes through the router while WAN-side initiated communication is blocked. With Port Address Translation (PAT), several clients on the LAN-side can gain access to the Internet. With Network Address Translation (NAT) there can be a one-to-one translation between LAN-side and WAN-side addresses. With Port Forwarding, servers on the LAN-side can be accessed from the Internet via the WAN-side port. The EIPR incorporates a four-port 10/100 Mbps Ethernet switch for multiple LAN-side connections. An external Ethernet-based modem — cable or DSL — attached to the 10/100 Mbps WAN-side port can be used to connect to the Internet. DSL modems connect via the PPPoE protocol.
Although the EIPR has many of the same features found in high-end routers, it is easier to install and commission. A resident DHCP server on the LAN-side will provide IP addresses to LAN-side clients while a DHCP client on the WAN-side will accept IP address assignments from the attached modem. Static addressing is accommodated as well. Configuration is via a web browser using authentication. With a DIN-rail mounting clip, rugged metal enclosure and the ability to be powered from a low-voltage AC/DC power source, the EIPR is ideal IP router for automation systems.
For more information, please contact us.
The Echo Burner Control is a plug-in replacement that allows you to upgrade the Fireye M Series Control to the industry standard, 7800 SERIES Control platform. This easy-to-use, plug-in replacement is a smart fit for today’s contractors that want the quality and reliability the 7800 SERIES controls provides.
E3Point by Honeywell Analytics is a toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line. It goes beyond protection to increase energy management, efficiency and economical value.
Date: March 6-9, 2012 (4 days)
Time: 8:00am - 5:00pm
Fee: $600
Instructor: John Hutchey, Honeywell & Jim Stiber, CCI
Date: March 13, 2012 (1 day)
Time: 8:00am - 5:00pm
Fee: $50
Instructor: Jim Stiber, CCI
Date: May 7-11, 2012 (5 days)
Time: 8:00am - 5:00pm
Fee: $1950
Instructor: Vern Peterson, MOV Training
Date: June 5-June 7, 2012 (3 days)
Time: 8:00am - 5:00pm
Fee: $895
Instructor: Vern Peterson, MOV Training
Date: October 22-26, 2012 (5 days)
Time: 8:00am - 5:00pm
Fee: $1950
Instructor: Vern Peterson, MOV Training